Description
Standard Features
- Two ytterbium fiber lasers, single mode infrared, up to 1000 W each
- 100% laser overlap, both lasers reach the entire build area
- Dynamic load balancing across both lasers during the build
- 80 micron laser spot diameter on focus
- Layer thickness from 20 to 120 microns
- Rectangular build area, 12.99″ x 12.99″ x 17.72″ (330 x 330 x 450 mm)
- Removable working chamber with automatic extraction
- Gas-tight filtration with automatic backflushing and passivation for 24/7 operation
- Blockchain-based build certification for verified part history
- Fleet management across every connected machine
- Open Parameters architecture, with the option to lock a validated process for production
- AI assistant built into the machine interface that suggests parameter adjustments as the build runs
- Predictive maintenance and anomaly detection
- Remote connectivity and monitoring from desktop or mobile
- Oxygen monitoring below 100 ppm (0.01%)
- Nitrogen or argon shielding gas
- Materialise Magics
Available Options
- Laser power configurations: 500 W, 700 W, or 1000 W per laser
- Beam shaping, available on request
- Powder handling from manual through fully automated closed loop
- Robotic part handling and production line integration
Support From Sodick
- Tailored process parameter development
- Powder supply and qualification support
- Operator and engineering training
- Application and design support
Especificaciones
| Build Area | 12.99" x 12.99" (330 x 330 mm) |
| Build Height | 17.72" (450 mm) |
| Working Chamber | Removable, automatic extraction |
| Laser Type | 2 x ytterbium fiber, single mode infrared |
| Laser Power | 500 W / 700 W / 1000 W per laser |
| Laser Overlap | 100%, full build area |
| Laser Spot Diameter | 80 microns (on focus), beam shaping available on request |
| Layer Thickness | 20 to 120 microns |
| Build Rate | Up to 2 x 100 cm³/h |
| Oxygen Monitoring | Below 100 ppm (0.01%) |
| Shielding Gas | Nitrogen, argon |
| Power Supply | 480 V / 60 Hz / 25kW / 27A |
| Dimensiones de la máquina | 153.54" x 82.68" x 98.43" (3,900 x 2,100 x 2,500 mm) |
| Peso de la máquina | 5.000 kg (11.023 lbs) |
| CAM Software | Materialise Magics |
Compatible Materials
- Steel alloys
- Aluminum alloys
- Nickel alloys
- Titanium alloys
- Cobalt-chrome alloys
Shorter lead times on production runs
Two lasers at up to 1000 W each move as much as 200 cubic centimeters of material an hour across a 12.99 inch plate. That equates to quoting shorter deliveries and holding less finished inventory to cover them.
A verified build record for every part
Each build writes its own history of parameters and process data, sealed with blockchain certification so it can be checked later. When a customer, an auditor, or your own quality team asks how a specific part was made, the answer is a record.
Oversee production from your phone
Fleet management brings every connected machine into a single view, with build status, process data, and performance across the group. Check a running job from your phone, see which machine is free, and catch a problem from the next building over.
How the AltForm Print Genius 300 compares
CaracterÃsticas | AltForm Print Genius 300 | AltForm Print Sharp 300 | AltForm Print Brilliance 300 | Other Production Metal 3D Printers |
Build area | 12.99" x 12.99" | 12.99" x 12.99" | 12.99" x 12.99" | Varies |
Build height | 17.72" | 17.72" | 17.72" | Varies |
Lasers | Two | One | Four | Varies |
Build rate | Up to 2 x 100 cm³/h | Up to 100 cm³/h | Up to 4 x 100 cm³/h | Varies |
Laser coverage | ||||
Zone seams in the finished part | ||||
Laser spot diameter | 80 microns | 80 microns | 80 microns | Typically 100 microns and up |
Automatic chamber extraction | ||||
Verified build record | ||||
Process parameters | ||||
Best For | Steady production where speed isn’t the focus | Production runs where build time has room to breathe | The highest output per machine and per square foot | General production additive |
